Question 1

When do I need a culvert?

Accepted Answer

If your driveway crosses a roadside ditch or swale, the county almost always requires a permitted culvert. If water needs to pass under a driveway, farm road, or pasture crossing, you need a culvert.

Question 2

How do you size a culvert?

Accepted Answer

By the amount of water it needs to carry — based on the ditch size, upstream drainage, and county spec. We size it correctly the first time so it doesn't wash out.

Question 3

What culvert materials do you install?

Accepted Answer

HDPE (plastic) and metal, depending on the county spec and site. HDPE is common, corrosion-proof, and long-lasting.

Question 4

Do you help with county driveway permits?

Accepted Answer

Yes. We help you understand the requirements and coordinate the culvert permit so you're not chasing paperwork alone.

Question 5

I have standing water in my yard — can you fix it?

Accepted Answer

Usually, yes. We walk the site, find where water is coming from and where it can't escape, and put together a plan — grading, swales, French drains, or a culvert tie-in.

Question 6

What is a French drain?

Accepted Answer

A gravel-filled trench with a perforated pipe that collects and carries water away from a wet area. Useful for around foundations, low yards, and behind retaining walls.

Question 7

What is a swale?

Accepted Answer

A shallow, shaped channel that moves water across a property using gravity. Cheaper than pipe when there's room for it, and easy to mow.

Question 8

Can you tie into my existing drainage or a county ditch?

Accepted Answer

Yes — where permitted. We coordinate any required approvals.

Question 9

Do you install headwalls or mitered end sections?

Accepted Answer

Yes — end treatments protect the culvert, hold back fill, and look clean at the driveway edge.

Question 10

What drives the cost of a drainage job?

Accepted Answer

Length of pipe, size of pipe, depth of excavation, materials, and how much grading or restoration is needed after. We spell it all out in writing.

Question 11

How long does a drainage or culvert install take?

Accepted Answer

A standard driveway culvert is often 1–2 days. Larger drainage projects run longer. We give a target timeline in the estimate.

Question 12

Do you warranty drainage work?

Accepted Answer

We stand behind our workmanship. Terms are documented in your written estimate.

Question 13

Is it better to fix drainage in dry season or wet season?

Accepted Answer

Dry season is easier to dig and grade. But we can work in wet season too — sometimes that's when the problem is finally visible.

Question 14

Can you help with pasture and ag drainage?

Accepted Answer

Yes — swales, culverts under farm crossings, and land shaping to keep pastures usable.

Question 15

Will heavy rain ruin the work right after you finish?

Accepted Answer

Sized and installed correctly, no. That's the point. If seed or sod needs time to root, we'll tell you and help you protect it during that window.

Drainage & Culverts

Get a free quote for drainage & culverts.

People also ask

Talk to us — free estimate, no pressure.

Browse other FAQs

General & Company

Land Clearing & Site Development

Driveways & Materials

Fencing & Gates

Tree & Brush